WTI Generic 2 Oral Practice Exam

These questions are part of the practice quiz. Start practicing

• GeoInt imagery (<2km) is used for which purpose?
• Which statement correctly contrasts a fillet weld with a groove weld and describes how throat dimension affects shear strength?
• What is the primary function of the Airspace Control Authority (ACA)?
• Which of the following is a nonverbal aspect of communication mentioned?
• What do NAI and TAI stand for, and what is their purpose?
• Which tier is established for extended periods of time and acts autonomously over specific missions?
• Which NDT method is most effective for detecting internal porosity in welded joints?
• When documenting a preheat plan, which elements are typically specified?
• Which step is a typical part of joint preparation before welding?
• Which organization runs the control segment?
• Which statement correctly describes all-position welding qualifications?
• In groove welds, what are the advantages of using a backing bar or backing strip, and when would you use it?
• Which of the following is NOT a terminal area execution option during TRAP?
• Which of the following is a SCAR tasking type?
• Which framework defines exclusive rights to offshore waters and resources, and is not signed by the USA?
• FACE's primary function includes construction and repair of HLZs and ALZs and what else?
• Which sequence correctly describes the sections of the 15-line format for PR information?
• Does UNCLOS extend to artificial islands, structures, or installations?
• Where does the PRCC sit in Marine Infrastructure?
• What is the role of a welding inspector in a production environment, and what records should they maintain?
• In IPB, which step involves evaluating the threat (Sitemp)?
• What common root causes lead to undercut and how would you adjust parameters?
• How is heat input for a weld calculated, and why is it important for process control?
• In the AWS E/ER filler metal designation system, what does the E denote?
• Why is preheating high-strength thick steel often necessary before welding?
• Which is a TACC responsibility?
• What is the primary method used to disseminate and track information during a PR mission?
• Which tier is described as managing targets and tracks of interest for its mission?
• What information should be included on a weld map sheet used in QA documentation?
• What is included in the ASSAT as prepared by the GFC?
• In your own words, summarize how you would approach an unknown welding problem in the field, including how you would gather information, apply codes, and communicate findings.
• HLZ and ALZ pertain to which type of operations?
• Which item is NOT typically included in a Welding Quality Plan?
• Planning considerations for FARP aim to increase which of the following?
• Which of the following is a strategy to mitigate GPS threats?
• Which types of jamming are identified for GPS threats?
• In IADS Components, which category includes active ground intercept radars and passive receivers?
• Which unit provides close-in low altitude surface-to-air missiles?
• Which factors influence the preheat temperature for a steel weld, and how is the final temperature determined?
• Which unit installs, operates and maintains expeditionary communications for the ACE, providing the digital backbone, phones, crypto, and chat?
• What does FACE stand for?
• Under composite warfare C2, what is the first principle of command-by-negation?
• What is the difference between all-position welding and flat-position welding, and how does this affect joint design and qualification?
• In IPB, which step involves determining environmental effects on the AO (MCOO)?
• Which factor is least relevant to PPE selection?
• Which item among the following is a planning consideration for a FARP that contributes to increased sortie generation?
• How do you decrease the amount of Time?
• What is interpass temperature control and how does it help manage residual stresses in welding?
• Which components should be included in a Welding Quality Plan for a manufacturing project?
• What should be included in a final project audit trail to ensure traceability after welding?
• BAAS PIMP brings together which teams to form the common picture?
• Which statement about common NDT methods and the defects they detect is correct?
• In MACCS, who retains the right to negate any action?
• Within the composite warfare designations, the letter W corresponds to which function?
• Which code arrangement matches carbon steel and stainless steel applications?
• FACE is involved in which activity related to forward air operations?
• What documentation is typically required to support a certified welding project, including records needed for traceability?
• Which statement best defines authenticity as described?
• What is OAS?
• Which statement best describes the objective of Air Operations against enemy installations as described?
• FACE is responsible for the construction and repair of HLZs and ALZs. It also constructs and repairs which type of facilities?
• Which action is an AADC responsibility to enhance decentralized execution of DCA?
• The mode of communication should reflect what according to the essential elements?
• What is the most important factor in TRAP?
• What is the role of NDT results in the weld map and QA process?
• Besides HLZs and ALZs, FACE also constructs and repairs which facilities?
• Within the warfare command designations, the letter Z designates which function?
• What effect can excessive welding speed have on a weld, and what corrective action would you take?
• Which statement best describes shielding gas selection for carbon steel in GMAW?
• What are the prerequisites to launch TRAP?
• Why is electrode moisture control critical in welding, and what steps ensure electrodes are dry before use?
• ALZ stands for Assault Landing Zone.
• How do you calculate fillet weld throat thickness from leg length, and why is this important for design strength?
• What are the three weapon engagement zones in air defense?
• Within the warfare command designations, the letter Q designates which function?
• Why is preheating important for high-strength steels?
• Who retains the power to negate any particular action by the CWC?
• MACCS stands for what?
• Who makes the ASSAT?
• Which safety practice for shielding gas cylinders is correct?
• Which measures help control distortion in welded joints?
• What is the primary mission of the Marine Air Traffic Control Company?
• Which is a component of the Air Assault plan?
• What is the significance of a 'fit-up check' and what tolerances are typically checked before welding begins?
• Define the heat-affected zone (HAZ) and discuss its properties.
• Within the warfare command designations, the letter P designates which function?
• Which of the following is a practical method to control distortion in weld assemblies?
• What does LAAD stand for?
• Which of the following is NOT listed as one of the three essential elements for communication?
• Explain the importance of heat treatment compatibility when welding dissimilar metals and the steps to mitigate galvanic corrosion risk.
• Which of the following is NOT a typical joint preparation step?
• How many orbital planes are there in medium Earth orbit for GPS?
• What is interpass temperature in welding?
• How would you determine the appropriate preheat temperature for an alloy steel of 90 ksi and thickness 25 mm, according to typical code guidance?
• An immediate re-embark occurs under what circumstances?
• What is the Sector Air Defense Commander (SADC) primarily responsible for?
• Who appoints the JFACC (Joint Force Air Component Commander)?
• What is a fundamental command and control principle of MACCS?
• What is the primary focus of the Officer in Tactical Command?
• How would you ensure traceability of material and welds from raw plate to finished product?
• Which pair is identified as the two foundational aspects of communication?
• How would you prepare for and conduct a final weld acceptance inspection, including test sampling and acceptance criteria?
• In TIG welding, what is the primary purpose of a root pass, and how does backing affect root control?
• Which unit provides ATC service at austere and improvised landing environments and formulates and issues ATC clearances?
• What is the current number of GPS satellites versus the number needed for 95% global coverage?
• Go criteria and No go criteria are tied to which factors?
• In the AWS filler metal designation ER70S-6, what does the "-6" denote?
• Which item is NOT listed as a planning consideration for a FARP?
• Which NDT method is primarily used to detect surface discontinuities and is often the first inspection performed visually?
• How do you manage the propagation of defects found by NDT to maintain overall product quality?
• When interpreting a basic weld symbol, which information is identified?
• Which documentation best validates that a welded joint was produced according to approved procedures (WPS/PQR) and material qualifications?
• In MACCS, describe the services provided by MACCS agencies to the ACE commander, such as setting up radios, routing, inflight updates, and taking IFREPS.
• Which is an extension off MACCS that provides ground commanders access to MACCS to utilize air?
• In the 15-line format, which lines correspond to the Execution section?
• HLZ stands for?
• Which of the following best describes the core responsibilities of the JFACC?
• How would you troubleshoot excessive weld spatter and poor bead appearance in a GMAW process?
• MAOC primarily provides which function?
• Which NDT method is most effective for detecting internal flaws and measuring thickness in a weld?
• Which items are included in the ABCD framework for authenticity?
• FACE stands for which of the following in the given context?
• Which of the following is NOT listed as a threat to GPS?
• Which option best describes strategic IAD?
• What is the correct statement about Weapon Engagement Zones?
• How is filler metal selection determined for a carbon steel weld, considering base metal composition and service conditions?
• In the GPS breakdown, which element is associated with monitor stations and Space Force operations?
• What is the ACA's process for Airspace Control Plan after JFC approval?
• No go criteria are tied to what factors?
• Who is the senior officer with command authority over all forces within a maritime operational area?
• Which of the following describes common porosity causes and corrective actions?
• Which component is more limited in scope and duration than Warfare Commanders and impacts only a segment of the force?
• Which capability is explicitly listed as part of MWCS services?
• Which welding process is known for high productivity due to continuous wire feed and moderate heat input?
• Which method is listed as a way to enhance your communication skills that involves self-review?
• Which position executes policies of OTC/CWC and is not autonomous?
• Which item is a planning consideration for a FARP?
• Which NDT method uses a liquid dye to reveal surface-breaking defects?
• Which role is not autonomous?
• In the maritime domain, which environment corresponds to green water?
• Go criteria are tied to what factors?
• ASLAT communicates which elements?
• Which component is described as replenishment officer?
• Which code specifically governs stainless steel structural joints?
• What are the main steps in a structured weld fault diagnosis for a porosity defect along the root pass?
• Strategic vs Tactical IADS is determined by
• IPB stands for
• Which MAGTF agency supports joint personnel recovery?
• What does PIR stand for?
• Which zone is designated for helicopter assault operations?
• Which component is used to make a 3D picture in GPS interpretation?
• Define PWHT and describe typical situations where PWHT is mandated.
• Which of the following is a planning consideration for a Forward Area Refueling Point (FARP) that contributes to increased sortie generation?
• Who makes ASLAT?
• Which documents are typically used to support a welding procedure and qualify personnel for a project?
• What is the recommended sequence of actions if a nonconformance is found during weld inspection?
• Which NDT method is used to detect internal flaws and thickness measurement in welds?
• Which of the following is an example of point defense?
• What do codes typically specify about interpass temperature?
• In IPB, which step involves defining the AO (area of influence and area of interest)?
• What is the appropriate action when a weld fails acceptance criteria during final inspection?
• What describes an emergency extract?
• In the SCAR tasking 'Smack', what is implied regarding ordnance release?
• What is the purpose of Priority Intelligence Requirements in relation to NAI and TAI?
• Which insert type corresponds to a position greater than 1000 meters from the objective?
• Which role has tactical control of the task force and directs subordinate commanders, with the OTC retaining the power to negate any action?
• What factors should be considered when selecting PPE for arc welding, and how do you ensure proper fit and protection?
• Which activity is an AADC responsibility related to DCA operations?
• Who typically approves a WPS after PQR qualification?
• What is root opening in groove welds and why must it be controlled?
• In which scenarios is backing material commonly used to support root fusion and throat geometry in TIG welding?
• What is the main difference between a Welding Procedure Specification (WPS) and a Procedure Qualification Record (PQR)?
• What is the principal distinction between IADS and air defense?
• GeoInt Topography data (>2km) is used to produce which products?
• Which practice most effectively reduces residual stress and distortion during a multi-pass weld?
• Which unit provides Marine Air Traffic Control Services, including weather radar coverage and both radar and non-radar approaches, departures, en route, and tower ATC services?
• In LZ calls, which term indicates the LZ is at or above briefing criteria?
• Which NDT method detects surface and near-surface cracks in ferromagnetic materials?
• Which sequence best describes handling a inspector's mark indicating 'Rejected - Machining required' on a weld?
• In IPB, which step involves determining threat COAs (event temp)?
• What is the recommended root gap for a typical groove weld on carbon steel?
• What is the function of the PRCC?
• What is the primary purpose of Lockout/Tagout (LOTO) in welding operations?
• All Source Intel includes which of the following components?
• What is the typical purpose of a PQR in WPS qualification?
• Which of the following are IADS Functions?
• Which insert type is defined as 300-1000 meters from the objective?
• In a weld, how do open root and closed root differ and how does this influence procedure and inspection?
• Which statement describes a primary responsibility of the Area Air Defense Commander (AADC)?
• Which NDT method is best suited for detecting internal discontinuities such as voids in welds?
• What is the offshore distance range commonly defined for exclusive operating zones?
• What is the heat-affected zone (HAZ) and how can it be controlled?
• In SIGINT, Electronic Intel focuses on
• Which component is responsible for directing and controlling subordinate commanders and coordinators?
• What types of cracking can occur in welds and which mitigation strategies are typical?